Audio Technica System 901 Transmitter and Bodypack

Audio TechnicaSKU: ATW-901A/G

Price:
Sale price$174.95

Description

Audio-Technica's System 9 is a four-channel frequency-agile wireless system designed to provide rock-solid performance along with easy setup and clear, natural sound quality. Featuring sleek, stackable, contemporary styling, System 9 is available in handheld, headworn, guitar, lavalier and body-pack configurations. The system offers four compatible user-switchable VHF channels (169.505, 170.245, 171.045, and 171.905 MHz). 

Each System 9 configuration includes the ATW-R900a receiver and either a body-pack transmitter or handheld microphone/transmitter. The ATW-R900a is a non-diversity, single-channel receiver with advanced dipole antenna design for extended operating range, which improves operation by providing a ground element in addition to the usual signal element. The ATW-R900a also offers volume control along with AF Peak, RF and Power indicator lights.

  • Easy to use, with clear and natural sound quality
  • 4 frequency-coordinated selectable VHF channels
  • 1/4" balanced and unbalanced XLR output connectors compatible with a wide variety of audio adapters
  • Reliable performance and rugged manufacturing
  • Advanced dipole antenna system to increase operating range

GENERAL SYSTEN SPECIFICATIONS

  • Operating Frequencies: VHF high band, 169 to 172 MHz
  • Modulation Mode: FM
  • Maximum Deviation: +/- 10 kHz
  • Dynamic range: > / = 90 dB (Weighting A), typical
  • Total harmonic disturbance: <1% (at 1 kHz, deviation of +/- 10 kHz)
  • Total harmonic distortion: <1% (at 1 kHz, deviation of +/- 10 kHz)
  • Operating Range: 200 '(60 m), typical (Open environment without signal interference)
  • Operating Temperature Range: 40 ° F (4 ° C) to 110 ° F (43 ° C) (Battery and LCD display performance may be affected by very low temperatures.)
  • Frequency Response: 80 Hz to 13 kHz
  • Maximum Simultaneous Use (Recommended): 200 'minimum

RECEIVER SPECIFICATIONS

  • Receiver System: Dual antenna system, without diversity and a single channel Image rejection: 50 dB minimum
  • RF sensitivity: 20 dBuV at 60 dB S / N (50 ohm termination)
  • Audio Output: Nominal output level; XLR, balanced: 350 mV (1 kHz modulation, 10 kHz deviation, 100k ohm load); 1/4 "(6.3 mm), unbalanced: 700 mV (1 kHz modulation, 10 kHz deviation, 100k ohm load)
  • Power Supply: 100-240 V AC (50/60 Hz) at 12 DC. 5 A (positive center) switched mode, external power supply
  • Dimensions:0 mm (7.48 ") wide x 46.2 mm (1.82") high x 128.5 mm (5.06 ") deep
  • Net Weight:0 oz (337 g)
  • Accessory Included: Power Supply

BODY PACK TRANSMITTER SPECIFICATIONS

  • RF Power Output: 10 mW
  • False Emissions: According to federal and national regulations
  • Input Connections: Connector with four pin anchor; Pin 1: Earth; Pin 2:
  • Instrument input; Pin 3: Microphone input; Pin 4: DC + 9V polarization
  • Batteries: Two 1.5V AA type, not included
  • Battery Life: 8 hours (alkaline) (Depending on the type of battery and usage pattern)
  • Dimensions:2 mm (2.76 ") wide x 24.9 mm (0.98") deep x 103.7 mm (4.08 ") high
  • Net Weight:8 oz (80 g), without batteries

HANDHELD TRANSMITTER SPECIFICATIONS

  • RF Power Output: 10 mW
  • False Emissions: According to federal and national regulations
  • Batteries: Two 1.5V AA type, not included
  • Battery Life: 8 hours (alkaline) (Depending on the type of battery and usage pattern)
  • Dimensions:91 "(251.8mm) long, 2.11" (53.5mm) diameter
  • Net Weight:2 oz (260 g), without batteries
  • Accessory Included: Quiet-Flex ™ AT8456a Pedestal Clamp

 

You may also like