Turbosound IQ12 12" Speaker

TurbosoundSKU: IQ12

Price:
Sale price$889.00

Description

The 2,500-Watt iQ12 is a powered two-way loudspeaker ideally suited for a wide range of portable and fixed installation, music and speech sound reinforcement applications. The driver complement includes an 12" low frequency driver with a low mass voice coil for improved transient response, and a high temperature 1" compression driver with copper-clad aluminium voice coil for extended high frequency reproduction.


Equipped with a very efficient and lightweight two channel KLARK TEKNIK Class-D power amplifier, the iQ12 provides an impressive 2,500 Watts of output power. A high degree of control over the loudspeaker system’s performance is managed by a sophisticated, but easy to use KLARK TEKNIK Digital Signal Processor (DSP), which provides dynamic EQ for remarkable full range response at low volume levels, and transparent limiting for the utmost clarity at high output levels – and long-term reliability. iQ12’s advanced DSP speaker modelling presets include detailed and accurate models of some of the audio industry’s most-respected loudspeakers.

KLARK TEKNIK also developed a highly versatile Spatial Contour Control (SCC) DSP function, which allows the user to easily optimise the iQ12’s frequency response for the physical speaker placement. This advanced functionality provides frequency compensation for stand, floor, wall or ceiling placement, much like the adjustments commonly found on studio reference monitors.

On the rear panel amplifier module, you will find a fully featured user interface consisting of an LCD display, the Channel A and B gain controls, and a single rotary encoder for intuitive access to level, EQ, Speaker modelling, SCC, Subwoofer Integration and Feedback Control (FBI). In addition to the two combination balanced XLR/jack inputs, balanced XLR outputs for each of the two independent channels, and a Mix Out XLR connector, the iQ12 features a mic/line switch and level control with signal present LED on each channel.

El iQ12 también presenta nuestra tecnología ULTRANET, que permite el uso de los cables CAT5 para transmitir señales de audio multi-canal prístinas y otra información entre los productos activados por ULTRANET, como mezcladoras digitales y sistemas de monitoreo personal. La interconexión de la distribución digital no solo elimina el potencial para RFI y interferencia que es común en los métodos análogos, pero también reduce el tiempo requerido de instalación y configuración significativamente. Un puerto a bordo USB ofrece acceso al control remoto del iQ12 vía computadora PC, también como el DSP y actualizaciones de sistema del speaker modelling.

La caja compuesta de fibra de vidrio reforzada y ligera está equipada con una rejilla de malla de acero perforada y una cubierta con un polvo robusto con múltiples puntos de arreglos internos para instalaciones permanentes. El iQ12 también ha sido adaptado con un montaje en poste dual, permitiendo que la caja sea montada derecha, levantada, o en un ángulo hacia abajo para la optima cobertura de audiencia. La entrada de poder principal y vínculo de salida es proporcionado via conectores Neutrik powerCON*

 

System

  • Frequency Response: 52 Hz – 18 kHz ±3 dB, 45 Hz – 20 kHz -10 dB
  • Nominal Dispersion: 80° H x 60° V @ -6 dB points
  • Maximum SPL: 130 dB peak
  • Crossover type: Active
  • Transducers: 1 x 12" (308.5 mm) LF driver, 1 x 1" (25.4 mm) HF compression driver
  • Limiter: Independent HF, LF, peak and rms

Amplifier

  • Maximum output power*: 2,500 W
  • Type: Class-D
  • Protection: Short circuit, open circuit, thermal
  • Connectors: Input A / B 2 x combo jack/XLR
  • Sensitivity: Line +4 dBu, mic -22 dBu, switchable
  • Input impedance: 20 kO unbalanced, 40 kO balanced
  • Maximum input level: +21 dBu
  • Output A / B: 2 x XLR Linked to input
  • Mix output: XLR, balanced
  • Output impedance: 100 O unbalanced, 200 O balanced
  • Ultranet input/link: 2 x RJ45
  • Mains Supply: Neutrik powerCON input 20A and link 15A

Controls

  • DSP: Rotary push-encoder Buttons for Process, Setup, Exit, Enter
  • Mixer section: 2 x gain controls (channels A and B) 2 x Line/Mic switch

User DSP Functions

  • Factory EQ presets: Positioning, Sound mode, Sound modeling, FBQ

Display

  • LCD 128 x 32, blue backlit

Delay   

  • 0 - 300 ms

Equalisation      

  • High and low shelving EQ: 2 x parametric EQ
  • Limiter: Zero attack input limiter
  • Presets: 20 total presets, 19 user-definable
  • Crossover: High Pass L-R 24 dB/oct
  • Protection: Lock-out function for all settings

Ultranet Digital Network

System

  • Signal: 16 channels
  • Latency < 0.9 ms

Cabling

  • Cables: Shielded CAT5
  • Cable length: max. 246 ft / 75 m recommended

Power Supply

  • Power consumption: 150 W @ 1/8 max power
  • Voltage (fuses): USA / Canada 120 V~, 60 Hz (T 15 A H 250 V)
  • UK / Australia / Europe: 220-240 V~, 50/60 Hz (T 10 A H 250 V)
  • Korea / China: 220-240 V~, 50/60 Hz (T 10 A H 250 V)
  • Japan: 100 V~, 50/60 Hz (T 15 A H 250 V)

Enclosure

  • Dimensions (H x W x D): 609 x 370 x 370 mm (24.0 x 14.5 x 14.5")
  • Net weight: 14.7 kg (32 lbs)

Construction     

  • Injection-moulded polypropylene enclosure
  • Finish: Black painted
  • Grille: Powder coated perforated steel
  • Flying hardware : M10 x 3 points

Accessories

  • IQ12-WB Steel wall bracket

You may also like